Specification：
Wedge prisms can be used individually to deviate a laser beam a set angle, or two wedge prisms can be used together for beam steering applications. A single wedge prism's ability to deviate the angle of an incident beam is measured in Diopters with 1 diopter deviating the beam 1cm at a 1m working distance.
Two wedge prisms can be used as an anamorphic pair for beam shaping (to correct the elliptical shape of diode outputs). Or, a pair of wedge prisms can steer a beam anywhere within a circle described by the full angle 4θ, where θ is the deviation from a single prism. This beam steering is accomplished by rotating the two wedge prisms independently of each other, and is typically used to scan a beam to different locations in imaging applications.
Note: Beam deviation is shown in degrees and diopters. One diopter is 1cm of deviation at a distance of 1m from the prism.
Material: Optical glass，Fused Silica, Silicon, Germanium, Znse, Zns, Sapphire,Caf2,Mgf2,Baf2...
Size:2-300mm
Size Tolerance:+0/-0.01~+0/-0.1mm
Thickness Tolerance:±0.01~±0.1mm
Irregularity (P-V) @ 632.8nm:λ/10~λ/2@632.8nm
Surface Quality:20/10~60/40
Angular Accuracy:<3”~3'
Clear Aperture:>90%
Bevel:Protective bevel as needed
Coating:Uncoated,AR,BBAR
Tel：0431-85178086 Email：lucy@bohroptics.com
Office Address: Kuancheng District, Changchun City, Jilin Province
Tel：0431-85178086
Email：lucy@bohroptics.com
Office Address: Kuancheng District, Changchun City, Jilin Province
Changchun Bohr optics Co.,Ltd All rights reserved 吉ICP备00000000号-1
